Courtesy of the Massachusetts Department of Environmental Protection's Website
The accumulated solids in the bottom of the septic tank should be pumped out every three years to prolong the life of your system. On-site systems must be maintained regularly to stay working.
Neglect or abuse of your system can cause it to fail. Failing systems can:
Be alert to these warning signs of a failing system:

DO have your tank pumped out and system inspected every 3 to 5 years by a licensed septic contractor.
DO keep a record of pumping, inspections, and other maintenance. Use the back page of this brochure to record maintenance dates.
DO practice water conservation. Repair dripping faucets and leaking toilets, run washing machines and dishwashers only when full, avoid long showers, and use water-saving features in faucets, shower heads and toilets.
DO learn the location of your on-site system and drainfield. Keep a sketch of it handy for service visits. If your system has a flow diversion valve, learn its location, and turn it once a year. Flow diverters can add many years to the life of your system.
DO divert roof drains and surface water from driveways and hillsides away from the septic system. Keep sump pumps and house footing drains away from the septic system as well.
DO take leftover hazardous household chemicals to your approved hazardous waste collection center for disposal. Use bleach, disinfectants, and drain and toilet bowl cleaners sparingly and in accordance with product labels.
DON'T allow anyone to drive or park over any part of the system. The area over the drainfield should be left undisturbed with only a mowed grass cover. Roots from nearby trees or shrubs may clog and damage your drain lines.
DON'T make or allow repairs to your on-site system without obtaining the required health department permit. Use professional licensed contractors when needed.
DON'T use commercial septic tank additives. These products usually do not help and some may hurt your system in the long run.
DON'T use your toilet as a trash can by dumping nondegradables down your toilet or drains. Also, don't poison your on-site system and the groundwater by pouring harmful chemicals down the drain. They can kill the beneficial bacteria that treat your wastewater. Keep the following materials out of your system:
On-site systems are individual wastewater treatment systems (conventional septic systems, innovative/alternative (I/A) systems, or cesspools) that use the soil to treat small wastewater flows, usually from individual homes. They are typically used in rural or large lot settings where centralized wastewater treatment is impractical.
There are many types of on-site systems in use today. While all on-site systems are individually designed for each site, most systems are based on the same principles.

A conventional septic system consists of a septic tank, a distribution box and a drainfield, all connected by pipes, called conveyance lines.
Your septic system treats your household wastewater by temporarily holding it in the septic tank where heavy solids and lighter scum are allowed to separate from the wastewater. This separation process is known as primary treatment. The solids stored in the tank are decomposed by bacteria and later removed, along with the lighter scum, by a professional septic tank pumper.
After partially treated wastewater leaves the tank, it flows into a distribution box, which separates this flow evenly into a network of drainfield trenches. Drainage holes at the bottom of each line allow the wastewater to drain into gravel trenches for temporary storage. This effluent then slowly seeps into the subsurface soil where it is further treated and purified (secondary treatment). A properly functioning septic system does not pollute the groundwater.
You can contact Eric from Southeast Septic Services at 508-866-7353 or email him. He’ll be more than happy to answer any questions you may have.